Hey guys so my season is on Saturday and I just got new arrows so I had to ew broad head tune so I paper tunes it perfect shot it sighted back in I was dead on linked up my broad head with fletch img shot at 20 looked like they were good backed up to 30 and I was a bit low back up to forty and shot and I was about 5 inches low so I shot a field tip to see where it would hit it hit dead on so I moved my rest up a sixteenth that brought the broadhead and fp closer but still low moved the sight up a bit and **** again a little higher but still about 1.5-2 inches between the two arrows high and low. So I moved my target back to 20 and shot and it was the same still low but a little closer moved my rest up again a little and **** a tad bit closer group moved my sight again and was just below my aiming point lost shooting light made another smidge of an adjustment in sight and rest and hopefully that will do it because I can shoot broad heads again till opening morning am I going to lose performance at all or is this the correct way to do it
