sight question

Discussion in 'Intro to Bowhunting & Archery' started by nhbuck1, Dec 24, 2016.

  1. nhbuck1

    nhbuck1 Newb

    Joined:
    Dec 24, 2016
    Posts:
    2
    Likes Received:
    0
    Dislikes Received:
    0
    when im at full draw when im aiming my pin always gets stuck alot lower the my target and i have to move my arm to bring the pin up, is this common? how can i correct this so my pin stays on target? also i have the apex covert pro sight and the tapes are not matching up with my sight in marks, 20 30 and 40 are good but when i got to 50 or 55 yards im hitting way low of the inteded target. thanks all merry christmas
     
  2. trtodd13

    trtodd13 Weekend Warrior

    Joined:
    Jan 8, 2016
    Posts:
    231
    Likes Received:
    123
    Dislikes Received:
    0
    Do you draw with your pin below the target? If so try drawing so the pin is above the target and bring your pin down on target vs trying to raise it.

    Sent from my SAMSUNG-SM-G920A using Bowhunting.com Forums mobile app
     
  3. BB4tw

    BB4tw Die Hard Bowhunter

    Joined:
    Jul 12, 2014
    Posts:
    1,640
    Likes Received:
    275
    Dislikes Received:
    1
    Location:
    Nebraska
    Make sure your anchor point is consistent. I struggle with this all the time. Out to 40 yards everything is fine but at 50 or more, small variations higher or lower in anchor amount to large changes in point of impact.

    a kisser button might help.
     
  4. 60X Custom Strings

    60X Custom Strings Die Hard Bowhunter

    Joined:
    Mar 22, 2014
    Posts:
    1,006
    Likes Received:
    9
    Dislikes Received:
    0
    Location:
    Cowansville, PA
    Try moving your d-loop up a little on your bowstring or add 1/4 turn to your bottom limb bolt.
     

Share This Page