https://www.amazon.com/Kiorafoto-Pr...+organizer&dpPl=1&dpID=519bdmZf12L&ref=plSrch Anyone have this sd card organizer? Looks like it's amazons top seller. I need a better system than what I have currently of just throwing everything into like a camera bag.
I use that one, only issue is the cards fit really tight, I keep a penny in the case and use that to pry the cards out of the slots. I have all my cards labeled and have two cards for each camera, it works very well for keeping them organized, I also labeled the inside of the case so each card has its own specific spot, keeps things simple, especially if I send it with someone else to check my cams, they can’t really mess things up.
I have that one too. It works well for me and keeps a tight seal so helps keep water and dirt out. It'll hold about 12 cards. The one I have has a an indention at the bottom that allows for you to get your thumb in there and get the cards out. its also convenient to clip to a pack. Mind does not have the slot for the micro SDs but at $8 its not a bad investment.
I have a pelican cast that looks just like that. I have two 8 card holders and one 12 card holder. If something happens to one of mine I would get another one. Sent from my SM-G950U using Tapatalk
I have this case. I like it alot. I have two chips for each camera, have all blank formatted chips on one side and all the cards I pull go into the other side for review.
I change out 12 each time I go out. As I swap them out I place the ones with pic/video on them with the label facing down. The others not swapped yet are label up. Easy to keep track like that. Sent from my SM-G950U using Tapatalk
Are you guys strictly using a SD card for one particular camera? Between me and my buddies, we all have different brand cameras so it's kinda a free for all on SD cards going into the cameras. With that being said, does formatting really help the consistency with our cards each time we clear them? Is it necessary?
I make sure the cards are always used in the same camera, I don’t know that you need to do that but I heard if you use a card in different brand cameras the card could become unreadable the next time you go to use it, I also only format my cards on the camera itself, and I format the card every time I put one in, also not sure if that is necessary either, but I’ve never had a card reading issue this way and I know others that have had several card issues.
I have 12 of the exact same cards, same brand, same capacity. I format the cards each time I view them but I do it on my PC. The cards go into 4 different brands of camera and I rarely have issues.
I don't put same card in the same camera. I have probably 20-25 cams out at any given time so it's a nightmare to do this. When checking cards, I move pics to folders by camera on my computer. Then I format the card. Then when I go to put them back in the cameras, I format them again in that cam. I find a much lower error rate when I format in the camera and it only takes a few seconds.
I never use the same card in each. Browning Stealth Reconyx Spartans and moultrie and have no issues. I do erase all files and folders on each card after viewing and saving what I want. Only the dcim file is on the card. Sent from my SM-G950U using Tapatalk