Scoring help

I've never measured a buck so I read the tutorial in the other section and took a go at it. I'd appreciate some estimates ! I imagine the taxi will be able to help me also. Thanks all !

 

115" he looks like the buck my wife took.

 

i would guess 120 but im no expert

 

How many mass measurements do you take ?

 

I am getting 118ish thats my best guess?

 

I see about 95 inches. Congrats again!

You always get 4 mass measurements per side.

 

One near the base and then one between the tines and one out towards the end ?


Sent from my iPhone using Tapatalk

 

Looks similar in size to the one I got last year, I'd say right around 120" or so. Not sure if you seen this or not, it's in the whitetail talk section.

http://forums.bowhunting.com/showthread.php?t=9167

 

Right around 105 give or take a little. I'm seeing about 15" inside spread, 20-21" beams, 2.5-3" G1's, 9 and 7" G2's, and 3.5" G3's The mass as Scott said is 4 measurements, the last one being taken halfway between your G3's and the tips. He's a fine first buck, not gonna make any record books, but he's still a fine animal and one that you should be very happy with. Congrats again.....

 

I'd say between 110 and 120. Be sure to let us know. Nice first.

 

I'm guessing in between 105-110

 

Thanks guys ! Here's what I came up with. Seems to be right along with everyone's educated guess'.

L R

19 1/8 M 19 1/8
3 1/8 G1 3 3/8
8 7/8 G2 8 6/8
3 3/8 G3 4 2/8
3 7/8 H1 3 7/8
3 3/8 H2 3 3/8
3 H3 3
2 H4 2 1/8

16 6/8 inside spread

111 3/8 total

 

i just learned at the taxi the other day and im getting 113 as my guess great buck

 

Congrats again! Beautiful harvest picture by the way

 

I was looking at your score and wondered how in the world I missed it by so much, so I added it up again. I got the same thing before I added the inside spread.... doh!

I was off on the spread though. I went 14.5. So my quess should have read 109.5.

 

VERY nice, pal. Congrats.

(ftr....I had 108, before seeing your string)

 

Thanks again guys ! Just got back from the taxidermist and he came up with 110 3/8 so that's what I'll go with. Our main differences was the mass. I measured about midway and he did it the correct way and used the smallest diameter.

*edit* comparing the two straight up we were off in a few places

 

Great Buck! Congrats.