I scored this shed I found turkey hunting in 2009 this morning. It is my first time scoring so if I left anything out please let me know. I went off of a scoring sheet I found on-line. If I was in doubt I went down 1/8" to be on the safe side. The only real question I had was on the H4 measurement. I measured it at the narrowest point close to the tip as you can see by the photo. Not sure If I did that right?????? The score I came up with was 61 2/8" I made sure to stay on the conservative side of things. I really wish I could have found the other side! MAIN BEAM 22" H1 4 4/8" H2 3 7/8" H3 3 5/8 H4 1 5/8 G1 7 1/8" G2 10 5/8" G3 7 7/8"
Yep you're measurement is in the correct place, well done. My guess of 61" worked out nicely :D Good luck sticking him this fall!
Dam I guessed off by by 5" its a nice one I believe your last H4 measurement is centered between tip and G3 at narrowest point. but may be wrong!!
Follow this link to see proper procedure for scoring antlers. This should help you iron out any questions. http://forums.bowhunting.com/showthread.php?t=9167
If you didn't look at Buckeye's scoring thread I'll give you a quick example here. On an 8 point you measure between the last point and tip of the main beam. For example If you've got 6 Inches from your G3 to the tip/end of the main beam you take the H4 measurement at the 3 Inch mark no matter what.
So what your saying is the measurement I took is actually smaller then what it should be because the half way mark is a little larger correct?
