I am broadhead tuning and I need to move my rest to the right but I am out of adjustment room to the right. Any ideas?
Are you left handed? If your right handed I could imagine your running into some serious fletching contact. What bow are you shooting? Arrows + spine, broadhead weight? If your right handed this could indicate a weak spine, decrease draw weight. If your left handed it could indicate a stiff spine, increase draw weight. OR, you could be in a serious need of tuning, your cam could be way out of tune, cam lean, etc...
I am right handed shooting 67# CX Mayhem 350s cut to 27.5 inches so I think my spine shouldn't be an issue. I checked for fletching contact and I seem to have plenty of clearance.
It sounds like your bow needs to be retuned to me. which bow is it? would it be possible to post a picture of the cam(s)? I could tell if it was out of time from that.
I agree with backcountry, bow sounds very out of tune any broadhead tuning should be micro adjustments if the bow is tuned with the correctly spined arrow the rest should be at center shot. If you post all your info bow, point weight if your using different nocks, inserts and draw lenght I'll gladly run that through on target.
Thanks for the replies. It was user error. I won't go into detail but it was just lack of common sense on my part and I got everything fixed.