My HDX is mounted nock level, arrow passes in line with the Berger holes but the launcher arm hits the riser with a very loud slap. What should I do? In the QAD setup video the launcher doesn't hit the riser at all, is that proper? Sent from my iPad using Tapatalk HD
Move rest and nock point up till it clears. Berger hole is a reference but having good clearance and a rest that doesnt bounce back off the shelf is more important. So is stealth, your bow will still tune fine if set up correctly
I have the same rest on my Mission Endeavor, I have to make sure that my cock vane is straight up when I shoot it or it hits the rest. Once I learned that I haven't had any issues.
