fooling with my new bow and making some changes to DL to accommodate string loop and such, here is my question, when i draw, i am setting on the let-off point or tight against the back wall (feels like i'm holding 45-50# instead of the 15-20# i think i should considering let-off) , i have been moving the DL cam and the string stop to the same settings "C" and "C" or middle of "C" and "D" always the same....what i'm experinceing is i feel that i am holding back more than my let-off weight should be, but if i ease up/out on my draw i'm at the point of break-over...any input appreciated....my thoughts are moving the "string stop" setting to between "B" and "C" and leaving the DL cam on Straight-up "C" setting, is the acceptable????, and will i encour any dangerous setting conflicts???? BTW, axe VI, 60#/75% @ (i've tried) 27.5-28.5 but i'm trying to find my comfort zone, and i am utilizing the same anchor point during these attempts i don't mind a small valley, but right now i feel like i'm between a rock and a hard place, kinda like my old reezen
