Please ensure Javascript is enabled for purposes of website accessibility

Phenolic Build a Long

Discussion in 'Traditional Archery' started by Kanga, Jan 13, 2010.

  1. Kanga

    Kanga Weekend Warrior

    Joined:
    Nov 15, 2008
    Posts:
    904
    Likes Received:
    0
    Dislikes Received:
    0
    Location:
    TX
    Time to make some linen phenolic.

    I have been asked on more than one occasion why I make my own linen phenolic.

    Well the simple answer is I want to save money and that when you add the shipping charges to the commercial stuff then it is just too expensive and you are limited to the colors they have, usually red, black and white.

    Now phenolic can be used in a wide variety of applications from riser accent strips, re-enforcing limb tips, limb butt overlays and knife handle scales to name a few.

    The big plus is you can make it any color you want you can use any cloth fabric including denim, which by the way looks absolutely awesome on a knife handle.

    Now if your wife is like mine and makes patch work quilts then all you have to do is sneak some material out of her supply.

    Of course she will already have a rubberized cutting board and rotary knife for her quilting if not then just a measuring tape and a pair of scissors will get the job done.

    [​IMG]

    If your wife or girl friend does not have any fabric then just head down to the local sewing, craft or any store that sells fabric and pick some up in the color that you want. If you decide on demin then head to the local second hand clothing store and pick up a pair of used jeans for a couple of dollars.

    Ok first step is to cut your material into strips for this exercise I have elected to cut my strips 3 inches wide and about 20 inches long.

    Seeing the length is longer than the board I keep the material folded in half and cut the strips.

    [​IMG]

    You will have to play around a bit to get the thickness you want I am aiming for about 1/16”

    Once I have the strips cut in this case 12 it’s time to prepare my very expensive press form.

    [​IMG]

    My press is just 2 pieces of ¾” ply that I have run through the drum sander to get smooth and perfectly flat.

    First I give both inside sections a good coat of paste wax or floor wax it don’t matter which, what this does is stops the 2 pieces being glued together if any epoxy escapes during the pressing.

    [​IMG]

    Then I lay some saran wrap over one of the boards.

    [​IMG]

    [​IMG]

    Now it’s time to mix up some epoxy, I use Aero/Marine 400 the same epoxy I use to glue up my bows.

    [​IMG]

    Lay 2 pieces of fabric on the saran wrap and cover with the epoxy; spread the epoxy out so it is roughly covering all the cloth.

    [​IMG]

    Then all I do is keep layering the cloth 2 at a time and adding the epoxy till all the strips are used.

    I do not put epoxy on the top of the last 2 strips of cloth, as the pressing will force the epoxy through the cloth.

    Now I fold the saran wrap back over the cloth from both sides and both ends, place the other board on top and then with 4 G clamps clamp them together as tight as I can get the clamps.

    [​IMG]

    [​IMG]

    Then place it in the heat box for a few hours to cure, if you don’t have a heat box then just leave the form clamped for a couple of days.

    Once the epoxy has cured remove the clamps take the form apart, remove the saran wrap trim the edges, I use the band saw.

    [​IMG]

    [​IMG]

    [​IMG]


    There you have your home made linen phenolic ready to use for what ever reason you want to use it.
     
  2. Bails-UK

    Bails-UK Die Hard Bowhunter

    Joined:
    Mar 4, 2009
    Posts:
    1,219
    Likes Received:
    16
    Dislikes Received:
    0
    Location:
    Staffordshire , England , UK
    Thats pretty cool Russ , you make everything for your bows .
     
  3. Kanga

    Kanga Weekend Warrior

    Joined:
    Nov 15, 2008
    Posts:
    904
    Likes Received:
    0
    Dislikes Received:
    0
    Location:
    TX
    Dave not exactly mate.

    I have been trying for years to make the wood but I have found tree's can make it better than I will ever be able too:p
     
  4. Bails-UK

    Bails-UK Die Hard Bowhunter

    Joined:
    Mar 4, 2009
    Posts:
    1,219
    Likes Received:
    16
    Dislikes Received:
    0
    Location:
    Staffordshire , England , UK
    LMAO , you smart ass :)
     
  5. bz_711

    bz_711 Die Hard Bowhunter

    Joined:
    Feb 19, 2009
    Posts:
    2,363
    Likes Received:
    36
    Dislikes Received:
    0
    Location:
    IL
    Russ,
    I love any of these "do-it-yourself" posts you put up...you make things look so simple, including your bow build-a-longs...but I know better:)

    Keep 'em coming...Thanks!
     
  6. Schultzy

    Schultzy Grizzled Veteran

    Joined:
    Jul 25, 2008
    Posts:
    9,692
    Likes Received:
    5
    Dislikes Received:
    0
    Location:
    Minnesota
    Or just have the guy from Texas ship you up some!! ;) Cool stuff here Russ!!
     

Share This Page