I just order some carbon impact ultra H 600 arrows and have received them. I have never used anything but carbon express and thought I would try these but the shfts look small anyone know bout these arrows. like the gpi or if they would work well with a 60# 29" bow the arrows will also be 29" .Any help would be great I really dont know nothing bout the carbon impact brands.
Unsure of exactly which arrow you have. You can find everything you need to know here. Even a chart for your draw length / bow weight ect. http://www.carbonimpact.com/
Thank you I have looked at their site when I got mine but it wasnt on there. Think it might be some old stock but I cant find anything bout the ultra H 600 online at all.
Absolutely NOT!!! They are a target arrow, meant for low poundage set-ups. You need something in a .400 spine, maybe even a .340 spine if you're shooting a 340+ IBO rated bow.
Never mind i remembered they made the 600 and 620 for a target shaft Sent from my LS670 using Tapatalk
There not that skinny , there just a hair smaller than a std. size shaft , in fact a Bohning Double Lock Nock that fits the std. size shafts .244 to .246 fits in them , I have 2 dozzen of the Carbon Impact Fast Shafts XLT 6500's that i play around with that i shoot out of my Invasion . 29 / 60 there stiffer than charts say for my bow but you cant go by the charts with these overdrive cams , a 400 will not tune where a 340 or 350 spine will .
So they will work with my setup, because the nocks that are on it don't go in the shafts like my carbon express rebel arrows and wondering if my tips will even go in them when I get my inserts in??
Yeah they come with Bohning Signature Nocks which are the same size as the Bohning Double Lock Nocks and they do fit tight , i took a little piece of 180 grit sand paper and wraped it around the shank of the nock and spun the nock in the sand paper and took a little off of it then they went right in like they should , it doesnt take much ........i believe your gonna like them once you start shooting them.......Go to there web site and post me a link of the exact arrows you have , mine are the .001 straightness and there tack drivers like i said mine are the Carbon Impact Fast Shafts XLT 6500's Hunting Shafts .
I can,t find them on their site I think they may have been old stock. I can't find anything bout them online. They are the carbin impact ultra H 6000 and they have the yellowish green writeing on them I will take a pic and send it to you tomorrow. Thanks for all the help.
Thats about average , next time look me up i'm a Victory , easton , beman , carbon express dealer , i have a shop but still hold a 60 hour a week full time job , i can make you a set of custom arrows that all weight the exact same , cut , squared , custom wraped to what you want and vaned cheaper than ya think , each arrow will fly the same .
Sorry didnt see you posted it went to next page. So are these target you think or be fine for hunting. I like my rebels but was looking for something that would still hit as hard with lil more speed
I'm not sure what the GPI is on those shafts , i have no specs on them or can find them on any of there charts
