I have a Hoyt CRX32 with 70# limbs maxed out (about 72#) and 29" draw length, my arrow length is 29" without tip. Question - what is the "perfect" arrow for this bow? make/model/spine/vanes? oh, and Im shootin 125g bh/fp thanks
You're gonna be best off with a .300 spine range unless you back out a little with your DL and using a 125gr tip. I tend to prefer Blazers because I get pretty good arrow flight, and they are so durable, others will have their opinions as well, that's just mine. I personally like Beman or Easton arrows because they're AMERICAN MADE, pick and arrow from either and tune the bow and you should be good to go. I used an arrow length of 28" but you'd also be fine using a 28.5" arrow in a .300 spine. ACC's 3-71 are a .300 spine if the numbering system they use throws you off.
i hope im right....you should wait till bruce or dubs or gmatt or one of those guys gets on here and answers it they know way more then me
What, you don't think my programmer is as good as Bruce's??? And Dubs and GMMAT don't even have programmers.... . . . . . . . . . :D
No hair off my head..... :D Then again, I look about like that little guy so I wouldn't lose a lot anyhow....