I recently pulled my card from my Moultrie M60 after it being out two weeks. When I went to the camera to pull it I noticed the display seems to be not working quite right. The letter blocks in the readout that tells what mode it's in and all that good stuff is going out. Some of them are working fine, others are really dim/faded, and others arent working at all. Any idea what is causing this ? I thought it might be the batteries but i wasn't sure so i left them in and put it back out for another two weeks. I went to pull it again expecting it to be dead, and it wasn't. I had about 140 pictures on it but the display is still messed up. Do you think it's a moisture issue or is the display just going bad ? The picture viewer screen is working just fine and is clear as can be. This is a friends camera that I borrowed and it was working fine, with the exception of a line that went through it when I got it. I just dont want to give it back to him in worse condition than when I got it. Any help would be greatly appreciated. I'll try to post some pics of it tonight when I get home so that you all can get a better visual of it.
This has been a problem with some of the older Moultrie cams. The company was(is) offering a replacement info strip with instructions for about $15. My I-40 has lines in the info strip but is still readable. Funny how some cam companies have certain issues plaguing their cams. I wish WGI would fix their wash-out problems that theirs have been having for a few years now.My Bushnells and Reconyx have been flawless.
