Mathews Creed please help.

Hi i just bought a new mathews creed and set it up heres my problem or question i noticed when i draw it back to full draw my downward buss cable touches and rests against my simplex cam is this ok is this how all the creeds are am i freaking out over nothing please help thanx so much i called my local shop and sent 2 tech requests to mathews but still waiting to hear back from both its been iver a week please help guys thanx so much

 

Is there a way you can post a couple pics so we can see what you are seeing?

 

Its not letting me post a pic i can email it to you or anyone thanx pkease hekp if you have a creed draw it back and look at yours

 

View attachment 40098

 

Heres a pic look at my red downward buss cable its on the cam please help is this ok ???

 

Just click the attachment thanx and help me

 

Can't see the picture

Sent from my SCH-R970 using Tapatalk

 

Yeah me either!

 

Can't view it buddy

 

There's his photo. I'll have to go see what mine is like.

 

Looks like I have a paper thin gap, nearly touching. You might have just a touch of cam lean?

 

I know about top cam lean how do i fix the bottom cam from leaning can i ad some twists or something or take some out thanx for the help

 

That little bit could be from the top cam. I'd bring it into a shop, or if you have the tools, check all your measurements (ata, etc.) and your top cam for lean.

 

A couple of twists will fix it, I had the same problem with my Hoyt and fixed it myself this weekend. I am lucky to have a friend with a bow press and a hooter shooter.

That said, I would take it to a shop. It never hurts to have a pro look at it. Especially with a new bow!

 

Ok the ata is 30 on the dot the bottom cam leans to the right to make the string touch should i ad twists to the keft side of the top cam ? Thanx again for all the help all my mathews have been awsome and no problems untill this creed

 

The top cam looks straight even at full draw and the ata is perfect where shiuld i ad the twists what side

 

I don't want to tell you to do the wrong thing. It took some tinkering to get mine right, and a bow press is essential. I still think I would take it to a shop. Ask them for pointers and then maybe you can do the maintenance yourself next time.

 

Ok the ata is perfect and top cam looks fine the bottom cam must be leaning to the right to make my cable touch should i ad twists to the top left side or which side should i try first thanx for all the help you guys nevet had any problems with my mathews untill this creed

 

My closest shop is 60 miles away i have a press and tools i would like to do it myself insted of wasting a ton of gas noney and then pay another 75 bucks to have it done the shop said it would be around 75 to work on and it might taje a coupke days i wanna do it myself i cant do all that driving with work and family and hunting