Here is a new arrow I'm working on: Goldtip XT7595 26.75" shaft length Standard Nocks 100gr Brass insert 100gr BH x3 2.1" Fusions (18gr) Bow: 2010 PSE Bowmadness MC 27.25"@70# Hoping someone can run this on OT2. Looking to see how I am sitting spine wise. Thanks!
That setup shows a weak spine. As a target arrow it shows weak but still good, as a hunting arrow it shows weak and not good. I would go with a .300 spine. That would be a bit on the stiff side but you can always add a little more tip weight or go with a 28" shaft.
Thanks Bruce, how far weak am I? I could bump down to a 25.5" shaft length, maybe shorter. I was hoping to stay in these shafts and get away from screw in insert weights.
I am not at that computer right now but it was kind of weak. I dropped the DW down to 60 before it was good. I suppose you could go 25.5 with one arrow and maybe drop your DW when tuning and see how it does. You could also go to a 50 grain brass insert (you would still have a good FOC) and probably keep the original length and maybe drop your DW when tuning. There are a couple other options, kind of a mix of what I said already but this should give you something to work with,
Sounds good. I am shooting a very similar set up right now. Looking forward to doing some testing. XT7595@ 27" Standard insert with a 50gr screw in weight Tunes perfectly
