Ok, so I just put a QAD drop away on the Mathews FX. The video states to put the knocking point at 1/8". Well I've seen other places say to use the manufacturers suggested knocking point... So that leads to my question, which knocking point to use. I know to properly tune you must set your own knocking point but which suggestion should you use? I've read where the Mathews FX should be knocked high.
I'm not as technical as some but what I do is set my d loop square to my berger hole. I then adjust my rest by walk back tuning.
Hey thanks. I actually had a $20 rewards from ****s sporting goods from buying stands and blinds, so I used that to buy a square. Believe it or not I was right on with what QAD said and Mathews said to knock it high. It's shooting great without even having to do anything at all.
Any place you set it is just a starting point until you begin the tuning. My normal starting point is level to 1.8" high depending on what cam system. Dan
