HHA Optimizer ol-5519?

I have this sight and i found that it shoots 60yds at number 40 and 20yds at number 15 so i put tape 25 on it and it didnt work i was shooting 25yds on the 35 yd maker? Any help? I cant get it to work =[ cost me 150 bucks so i hope i can get it fixxed

 

I believe for sights like that you need to make your own sight tape. On Target 2 has a sight tape function. It takes all the variables such as DW, DL, arrow weight, etc and makes an accurate sight tape that can be mounted on your sight. If you don't have something like that I would just put a blank tape/paper over the current one and sight in the yardages manually.

 

Yea it came with a few tapes that can be sighted in manualy...it also came with 43 tapes that are supose to fit the sight for any different speed=[]

 

You need to use tape number 55. Dont use the number you came up with. Look at the chart that came with the sight. If you came up with 25 then it says to use tape number 55. Trust me it will for for you if done right.

 

I believe Bow Freak is correct.

I have an HHA sight and it has worked out great for me.

Let us know how it works out for you.

C

 

Bowfreak is right. i always sighted in at 20 and 40 yards then matched it with the corelating number from the sight tape selection.

 

Thanks guys ima have to try it out

 

so your saying that my 70lb monster ibo 353 shoots 4th slowest on the charts?

 

This is the chart I was going off of. My next question is, did you use the 20-40 yrd method or the 20-60 yrd method. The chart is set up for the 20-40 yrd method. This is what I used. If you were using the 20-60 yrd method, you did it the right way, you dont need the chart.

 

Just want to clarify what you are shooting.

Are shooting the Dial Sight?

Or the sight that has the slider arc on the rear?

Dan

 

Yea im shooting at 20 and 60 =[] idk whats going on i guess ive been messing up

 

im shooting the slider the ol series 5500 with .19 pin =[]
Still cant get this thing to work

 

I sell all the HHA sights but I am much more familar with the Dial sight since that is what I use, and push.

Whether I am sighting in my own bow or helping someone sight theirs in I always get numbers from the sight in tape at 20, 40, & 60.

I then cross check the tape that is suggested by using both methods. The 20 to 60 yard method and the 20 to 40 yard method.

The sight has always worked like a Dream. I Love it!!

Only Downside is price but I just keep moving mine from one bow to the other

Dan

 

I guess that im going to have to do both and see which works best...i really hope that i can get it set up good...i love to shoot around in the yard and go to bowshooots (3d shoots) to practice up for the hunting season.

 

Be patient! I've never seen one that didn't work and I know I've put them on bows shooting from 230fps to well over 300fps.

Where in IL are you? I'm in IL

I know it's a Big State

Dan

 

south west...and im shooting around 315fps i beleive...and the 25 tape didnt work =[

 

I am in SW IL. Actually about 45 miles southeast of Mt. Vernon. If you want to try and get together someday PM me and we'll try to plan something.

I'd be glad to try and help as I have setup several of these sights

Dan

 

what city?
Im going to give it a try as soon as my new arrows come in and if it doesnt work again ill have to take a little drive down there =[]

 

I'm close to Carmi. You can PM me or my number is on my website

Dan

 

Thanks ima give it a try around the 26th of this month and if it doesn work ill make sure i pm you
THanks!!