HHA Optimizer Lite

Discussion in 'Tech Talk' started by killer chill-r, Feb 13, 2016.

  1. killer chill-r

    killer chill-r Weekend Warrior

    Joined:
    Jan 4, 2016
    Posts:
    466
    Likes Received:
    91
    Dislikes Received:
    0
    I got the TE5510 on my new Nitrum Turbo & at my house in the city I don't have 60yrds to finish sighting it in. Has anybody had good luck with 20-40yrd sight procedure & what holes should the housing be mounted on? I have it set right now on the very bottom & my 20yrd mark is on #3 on the dial.
     
  2. Jacob Neubauer

    Jacob Neubauer Newb

    Joined:
    Feb 9, 2016
    Posts:
    28
    Likes Received:
    1
    Dislikes Received:
    0
    I did not use the 20 and 40 but I will do that this coming season. What I did is you take the blank white tapes and make a line where your 10,20,30,40 and on. So I knew that it was for sure it was sighted in.
     
  3. jrule

    jrule Newb

    Joined:
    Feb 15, 2016
    Posts:
    1
    Likes Received:
    0
    Dislikes Received:
    0
    I used the 20 and 40 sight procedure with my NO CAM and it worked for me.


    Sent from my iPhone using Tapatalk
     
  4. kurveball18

    kurveball18 Die Hard Bowhunter

    Joined:
    Feb 22, 2014
    Posts:
    1,206
    Likes Received:
    92
    Dislikes Received:
    0
    Location:
    Wisconsin
    I used the 20-40 with my No Cam last year and it worked perfect. You just have to be really precise. I like to a use a 32" target stabilizer when I sight in as it really helps me hold it steady so I can get it dead nuts.
     
  5. J.Mcgee

    J.Mcgee Newb

    Joined:
    Feb 22, 2016
    Posts:
    12
    Likes Received:
    0
    Dislikes Received:
    0
    Location:
    Central Louisiana
    Here is a tip for you. if you have a scanner scan the sight tapes to a file on your computer and go to Walmart and buy some shipping labels. get the ones that have 2- 5.5 x 8.5 per page you can print the sight tapes onto the labels and have an endless supply of sight tapes to do all the tweaking you need. Once you figure out which one is perfect for your setup wrap some scotch tape around it and you are set. and for a heck of a lot cheaper than 14 dollars per sight tape set when you really only need 1 out of the whole set when its all said and done That's what I do its not much trouble to cut the tapes out with a pair of scissors I have never used my original tape sticker.
     
  6. SharpEyeSam

    SharpEyeSam Legendary Woodsman

    Joined:
    Aug 25, 2011
    Posts:
    10,697
    Likes Received:
    217
    Dislikes Received:
    0
    Location:
    Raleigh, North Carolina
    I used to 20-40 setup in past years and it has worked fine for me. I am trying the 20-60 this year on my HHA KingPin.
     

Share This Page