I recently purchased this site and finished dialing it in today. I used many bowsights over the last 35 years and was very skeptical about how this sight would perform. This is a single pin sight, with a height adjustment wheel that allows you to adjust the site in 1 yard increments. It requires you to dial it in at 20 yards and then 60 yards, once done you you can shoot from 20 to 70 yards... I've got to say I am more than pleased, this thing is awesome! It has eigth of an inch windage adjustments at 20 yards, no tolls required, 1 click = eigth of an inch... After sighting it in, I went for 50 yards to 40, 35, 30 and 25 and the height was spot on and groups were the tightest I've shot changing distances that way... Good 1-5/8 inch sight window,, easy to se level and super bright pin. A little pricey, but considering I buy a bow every 10 years, it's worth it... Just one guys un-biased opinion, but if HHA wants to send me a check, I'll cash it!
I have the same sight. I think it's great just 1 pin. I wasn't sure until last season I got a nice buck on the 2nd day of the season. I put on a new peep with it , a metta. works great
I did my best to match the peep diameter with the site window diameter, not even sure what kind of peep it is. Why the Metta peep, what are the advantages?
HHA Lite Ultra Not sure I'd shoot at an animal outside of 40 yards or so, but for 3D its allowing me to group at 60 yards...
Love the site myself and took a Ram at 68 yards because of that site. I did put the smaller pin on mine but besides that it looks like we have the identical set up. Ps. Keep a piece of paper with your bow when you practise and write down if the site is off a yard or two at differt distances. After a month or so of using it you may change your tape up or down the scale.
sweet shot afflicted. i love my HHA and think about going to the 0.010 pin for more accurate distance shooting.
want to get a smaller peep so i can line that up with the sights outer ring for another point of reference
yeah i have that peep in 1/4 inch and 1 5/8 inch housing and it doesnt line up so i wanted a 3/16 inch