Discussion in 'Tech Talk' started by sletten25, Sep 18, 2016.
Is it ok if my fletchings are hitting my buss cable? And if not how to change this?
You don't want your fletchings hitting anything, try rotating your nock till the fletchings have clearance.
Alright I'll try that thanks
What kind of a bow is it? On some of my older bows the guide rod for the cables had a bend in it so you could move them over a little if it was needed. At any rate, you don't want any kind of fletching contact (unless you are shooting a whisker biscuit) with your cables or rest.
I'm shooting a pse drive r
I would try adjusting the guide rod a little too. On my PSE Vision I can adjust the cables to the side quite a bit. Just loosen the set screw and rotate the guide rod in the direction you need.
Ok thanks for the advice guys
Separate names with a comma.