As the title states my Bowtech Carbon Knight has created a click when pulling it back. This is at the very start of the pull. It sounds like its coming from the bottom cam. I have inspected everything and it seems fine. Is it a possibility that the cam itself just needs some lube? Thanks in advance..
Make sure every bolt/screw is tight on the cam. Had a module screw loose on one of my bows that caused a click noise. May be best to have a dealer check out your bow. Sent from my SM-G920V using Tapatalk
Buddy of mine had a prodigy that did the same thing. Took the cams off to check everything out and the bearing fell out in pieces he said
I tried the lube but with no luck... Guess i will take it to a small pro shop i have near my house.. During the day they aren't too busy. Maybe look at the local trade-ins they have.. I still have a month before season to tune in a new bow .
So I went back to the bow today and pulled it back and no click. I am to assume that it took the oil a little set in. I am back at slinging arrows every morning after work. October needs to hurry up!