Please ensure Javascript is enabled for purposes of website accessibility

Cardboard target

Discussion in 'DIY Archery & Hunting Projects' started by ybohunt, Nov 19, 2015.

  1. ybohunt

    ybohunt Die Hard Bowhunter

    Joined:
    Mar 8, 2014
    Posts:
    1,433
    Likes Received:
    262
    Dislikes Received:
    1
    Location:
    Huchinson kansas
    I finished my 2nd cardboard target.Just folded the bottoms out flat and stacked them up about 36in high and then put a piece of board on the top and bottom then ran a rachet strap around it and cranked it down tight.For the dots I just cut a template out of cardboard and spray painted over it.55 pounds penetrates about 8-10 inches at 30 yards.It is a little on the heavy side at about 25-30 pounds.However the weight seems to help keep it from rocking back and forth when the arrow hits. image.jpg
     
  2. ybohunt

    ybohunt Die Hard Bowhunter

    Joined:
    Mar 8, 2014
    Posts:
    1,433
    Likes Received:
    262
    Dislikes Received:
    1
    Location:
    Huchinson kansas
    Not sure why it uploaded upsidedown.
     
  3. Clem

    Clem Weekend Warrior

    Joined:
    Sep 12, 2015
    Posts:
    100
    Likes Received:
    1
    Dislikes Received:
    0
    Location:
    Frederick MD
    Nice, I was thinking about doing this and making some weather protection for it so I did not have to bring it inside
     
  4. ybohunt

    ybohunt Die Hard Bowhunter

    Joined:
    Mar 8, 2014
    Posts:
    1,433
    Likes Received:
    262
    Dislikes Received:
    1
    Location:
    Huchinson kansas
    As far as the waether protection goes I just cut a bag in half and streched it over it.
     
  5. Aliraza002

    Aliraza002 Newb

    Joined:
    Dec 11, 2015
    Posts:
    1
    Likes Received:
    0
    Dislikes Received:
    0
    Some of them out there are pretty cheap $$ nowadays.????
     

Share This Page