i have a pse rogue x and need a 26 inch draw length. The bottom cam has a draw stop for 26 to 30? if i put in on 26, is the cam on bottom supposed to turn over all the way like it does at 30 inch draw, or it doesn't because the draw stop is there? I drew the bow back both at 26 and 30, and 30 inch draw the let off is there like it should be.. At 26 inches the let off isn't there at all. Is this because the cams are not timed? Sorry if thats alot of questions, im sort of a beginner.
If you are not fully sure or know what you are doing, then I would let the professionals deal with it. I mean that is their job. Take it to your local dealer and have them look at it. They can even tell you how to do it correctly.
To adjust the draw length on that bow I believe you need to change the draw length module and then move the stops to that draw length. You just can't move the stops. Your bow will not be performing right and you might damage it. Call a PSE dealer and have them send you the right module or take it to a shop to change.
