Broadhead for bear

Got my bear tag and will be using my bow just wanted some recommendation on a mechanical bh

 

I have shot 2 with NAP Killzones. Great head for anything and everything.

Sent from my SM-G920V using Bowhunting.com Forums mobile app

 

I see you use Rage so if you like them I'd just size down to the SS or Hypodermic+P

 

Swhacker is the way to go


Sent from my iPhone using Bowhunting.com Forums

 

Any rage 2 blade will do the trick, NAP Killzone is a good option too>

 

Well,....
Most bear hunts are a close range thing.
WHY do you feel the need for a mech head?
After having 100% failure rate on mech heads, I will

NEVER let them in my bear camp again!!!

Now before the nay-sayers start thier bashing, I'll say this..., Not for sure numbers but I'm guessing I have been in on close too 200 archery bow,bear kills. I myself have bow killed about 48-50 . I've only lost one. These have all been killed with boring old muzzys with the exception of a couple thunderheads years ago.
The farthest recovery in all those has been maybe 60-65 yards!!
Most go 20-30 and are piled up. Up
Over the last 5 or so years, I've had guys in camp that have brought upmech heads. Maybe 8-10 have shot bear. Most lost and the few recovered, the closest was about 100-120 yards.

Bear don't always bleed much and a pass through is important.
And YES.. I consider a bow shot bear going 100yards without dieing a failure..
Bash away

 

Didn't reply b/c you said mechanical suggestions. But I too would want a fixed blade for bear.

 

Killed a bear last year with a NAP Killzone Maxx and he went 40 yards tops. The three I killed previous to that all died from a G5 Montec fixed blade. Any good deer setup will work just as well on bear!