Well as much as I like this bow, it's on backup duty right now since I've received my RPM360. I just broke the piggy bank buying an ATV and still need some toys for it, so I'd like to free up some cash and unload this bow. Hopefully someone else can get their hands on this that will actually shoot it. The bow is a 2013 model. I've put roughly 100 shots through it, hunted one time with it in 2013, killed two deer during that hunt, and since then it's been hanging in my man cave. If I still had the tags for it you would likely not realize that it's not new. There is no limb peeling (pics below), and the only flaw I can find is a small blemish in the finish on the riser where a set screw from a rest made contact. Once a rest is installed on the bow this won't be seen, and if I was dishonest I could likely cover it with a sharpie and most people would never notice. The bow will come with the draw length and draw weight adjusted to your specs and with the cams timed. For those of you that aren't familiar with me, I've been on BowTech's Pro Staff for several years and I have a full shop in the basement. Before it ships I will ensure the bow is tuned properly. It will come in the original box as well and I'm sure I can probably dig up a new and unused BowTech hat to include as well. I'd like to get $650 shipped to the lower 48. If you are local and want to coordinate a pickup I'd take $625. Please be advised this is for the bare bow only, none of the accessories pictured come with it. Specs and pics below: Draw Weight - 60lbs Mass Weight - 4.2lbs ATA - 32" MSRP - $999 Let Off - 80% Draw Length - 26.5" to 31" IBO Speed - 335fps Brace Height - 7"
Why can't you be LH, Matt? I would own so many of your bows by now :D Good deal, here everyone. This equipment will be like brand new coming from him.
