I ran across a deal on a Bear element for $115. Felt it was a decent deal so I grabbed it. The sticker shows that it has a draw length of 29" and set at 70 lbs. Since there is no manual I am wondering if someone can tell me what the lowest pound and draw length I can set it at. I bought it as a back up and currently shoot with a 26" draw at 58 lbs with a Hoyt Rampage XT. Any help you can give me would be great. Thanks
To change the Draw Length on the ellement you have to change the Module, which you can get on ebay. the Draw weight you can drop like any other bow unless it has the lil allen screw in the rise to help keep everything snug if that is the case you have to loosen the 1/2 turn to drop the draw weight. I hope this helps.
I am reading the DW options are either 50-60 or 60-70. If it says 70, I am betting on 60-70. That sounds like a good deal on the bow if it is in good condition.
Sweet price on that one...congrats. Like mentioned, the draw weight on the bears goes in 10# on the limbs.
As for your draw length, yes it has an adjustable DL from 24"-31", ATA 32", IBO of 300-304fps, Brace of 7.75", 75% let off, Mass Weight of 4.1lb and the camo pattern is Real Tree Hardwood Green "HD". Thats a nice back up bow and for a pretty great price. Oh and it was approved by Team Primos and is more than likely a 2007 model. Congrats on scoring a nice back up bow.
