I honestly don't know where to begin. But I have paper tuned it to shoot bullets. Then I french tuned it. Now i am at bare shaft tuning. I don't know how to do it. I know that I have to get my bare shaft to fly like my fletched arrows but I cannot find anything to help me learn HOW to get them to fly the same. As of right now, my bare shafts are shooting about 2-3 inches higher then my fletched arrows. How do I get that to changed? Can anyone provide links or a video on a great walk through of how to bare shaft tune? My current set up is the Bowtech Experience, 27 and a half inch draw, approximately #68. I am shooting Bloodsport Impact hunters (spine 350) cut at 27 inches of carbon. The outsert covers the last 3/4's of an inch of the shaft and sticks out about a half inch. I am shooting 100 grain field tips/ broad heads. If anyone could help that would be greatly appreciated. Thanks gentlemen
http://www.mfaa-archery.org/Tech-Support/The_Nuts&Bolts_of_Archery.pdf Sec 6-8 Great info Sent from my iPhone using Tapatalk
