Guys, I just picked up a new PSE stinger about 3 weeks ago and have put about 150 arrows through it. My D loop used to face me now it is pointing towards the riser and it seems like my D/L hs increased about a half inch. Do factory strings have a break in time or "strech" after shooting? I have never dry fired the bow. It also seems like my peep has moves causeing my anchor point to have changed. My peep has been served into place and I cnt move with my fingers so it seems like my strings have mabey streched. My groups are good and tight but I am shooting high now and had to move my pins to compensate. Is this normal?
I purchased the same bow back in January. And yes it takes a bit of shooting to get everything to settle in. My d loop moved also but after a bit it will stay in position. Just grip the string tightly and twist the d loop back. I changed out my peep to one that doesn't use a tube and I have the d loop trained to position the peep at full draw. The string shouldn't have stretched that much but it can be put on a press and shortened a bit by moving the string on the cam. My d loop is about 3/4 inch in length but could be shorter if needed. Make sure when you are at full draw you close you eyes, set your anchor and then open your eyes. If you are not looking thru the peep it isn't in the right place and needs to be moved. I really like my bow and shooting nice groups at 10, 20 and 30 yards. If you have any other questions let me know.
