I have a PERFECT 2010 Hoyt Alphamax35, the bow was a Hoyt Custom Build Z3 Alphamax35, w/ Z3 4.5 cams that make it a 28.5" DL, draws about 64# max w/ the Z3 cams right now. I also have a set of XTR cams and strings to go with it w/ a 28" Module. The bow is set up with a Fuse/Hoyt Acculaunch Drop-away, Fletcher Tru-peep, Loop, and Extreme RT1100 4-pin sight in matching APG camo. All you need to do is pick a quiver and stab and you're ready to go. The bow is in PERFECT condition, not even a mark from a set screw from a rest. I also have a Kaz-away that I could put on it if you'd rather have it than the Fuse/Hoyt Acculaunch Drop-away. As it sits bow, rest, sight, extra strings and cams.....$600 shipped. Side by side, I shot one of these Z3 bows next to the Carbon Matrix, Carbon Element, Z7, CRX32, CRX35, and I couldn't see where any of these bows would ever be an upgrade, thus I'm keeping the 29" Z3 cam bow that I have. Pick of the bow bare.... Hoyt 180 Grip
