Which broadhead do y'all recommend?
I need a good FIXED BLADE cut on contact broadhead.
Expanding broadheads are forbidden here in Idaho -...
Problem with that.
The local shoppe does have light bows to 35 pounds at a 28 inch draw. They normally don't stock traditional bows with a heavier...
After much deliberation, I have come to the conclusion that my hunting days are over.
Phisical disabilities (such as the inability to walk 1/4...
Most broadheads fly differently from a fieldpoint of the same weight due to the differences in aerodynamics.
Best and smartest to sight in using...
Try and find a used Diamond Archery "Diamond Edge" with 60 pound limbs.
Pull can be set from 7 pounds to 60 pounds. (when maxed out mine scales...
Fact, or "Fiction"?
"You should use the same anchor point when shooting a compound bow and a recurve or flatbow."
I am unable to contort enough...
Not sure if this is the correct section for my question.
Does anyone make a good cut on contact fixed blade 2 or three blade broadhead...
"It was a mirage ... or maybe a ghost ..."
Sure! I'd shoot it.
From 100 yards with my .22.
Range I go to (at the Pro Shop) is 20 yards.
So I start and finish at 20 yards.
I'm afeared of heights so my favorite "climber" is an elevator.
I have a wrist sling on my compound bow.
I plan on adding one to my recurve.
It can't hurt?
Only five mistakes?!?
I figured there was at least 900 ways to make an "oops" when I go after my first Elk.
I had both replaced at the same time.
I like a well timed double jaw release.
I think it wears the D loop the least. IMHO a hook release or single jaw release rolls the D string when...
My treestand will never fail. I don't use one.
I'm afraid of heights so I keep my feet on the ground.
If Fair Hunt and I could afford the hunt, yes.
Nope. I don't spray my bow or my arrows with scent killer/eliminator.
I don't believe it is necessary. Truth to tell, I didn't use a scent killer...
The manufacture's name, and so far as I can tell, the model number or name is worn off my take-down recurve.
The Pro Shop I bought it at does not...
Add 2.5 pounds for each inch over the rated draw length.
Subtract 2.5 pounds for each inch under the rated draw length.
Separate names with a comma.