What does everyone think Single pin or multiple and why? Sent from my iPhone using Bowhunting.com Forums
I like multiple so i dont have to worry turning the dial on a single pin Sent from my SM-G920V using Bowhunting.com Forums mobile app
I am a big fan of single pin sights. I keep it set at 25 and can shoot to 40 without moving it (I practice and I know where to aim). I have it dialed in so if I have time to move it I will. But if I don't have time I can take the shot. I like the sight window of the single pin much better than multiple pins.
Single pin. The "dial adjusting" idea cracks me up. I've never touched my adjustment dial in the stand. Like Coop said, my bow shoots plenty flat enough. I won't shoot more than 35 yards. If it's on the backside of my range, or extremely close, I'll simply hold a touch high or low. Easy-peasy... no chance of accidentally using the wrong pin and a very generous sight window. Sent from my iPhone using Tapatalk
I have been back and forth between a single pin setup and a two-pin floater several times in the past 6-7 years. For the 2016 hunting season, I shot a single up pin on a '16 CBE Tek Hybrid Pro set at 20 yards. Without touching the wheel, I killed deer at 7, 21, 26. 29 and 31 yards. If you spend some time with your bow/arrow setup and have it tuned properly, shooting out to 35 yards is not a big deal. Beyond that you should have time to make an adjustment or wait for the situation to develop. I am enjoying the less cluttered look of my scope and have no plans to change for 2017.
I went to a Spot Hogg Boss Hogg 3-pin last year...if you don't know about it, it's an adjustable sight with a 1, 3, or 5 pin option for the pin housing. I sight the three pins in at 20, 30 and 40. I can leave it in the home position and it's just a standard 3-pin sight. I use the middle pin as the adjustable so in the home position, the tape is set to 30 yards. If I have time to dial it in to an exact yardage, I can...27, 34, 48 yards...just use the middle pin for the exact yardage. Here's what I really like about it...if you anticipate a range and set your yardage but the target changes, if you calibrate your top and bottom pins, you can use them. For example, while on an elk hunt, the elk are moving through and you anticipate the shot to be 50 yards. You set your pin to 50, but the elk doesn't come on the exact path. No problem because I know that if my middle pin is set to 50, my top pin is 42 yards and my bottom pin is 57 yards. Once you figure out your ranges...you have a lot of options. I just figured out 40 and 50 but you could do more...35, 40, 45, 50, 55, and so on. I hope that made sense.
I have tried several different sight setups from a single fixed pin to a three pin slider. I always come back to a simple three fixed pin setup. I set the top pin to 20. I set the bottom pin to whatever my max effective range is. and the middle pin splits the difference between the two. I'm currently set at 20, 35, and 50 for the upcoming 3D season.
DD - makes perfect sense, I do the same thing but use a MBG Ascent 3 pin except my bottom pin floats and the top two do as you say. Lots of variety.
I prefer the more open sight picture the one pin offers. I also like the exact yardage settings my sight dial gives you especially for longer shots. Sent from my SAMSUNG-SM-G930A using Tapatalk
Love my single pin!!! When I get to my spot, I range everything out and then set my pin to split the differences. After that, I'll maybe move it if I need to..
I like a single pin, I put it at 30 and know my hold under/over for 20 and 40 (only a couple inches). But I do like 3 pins, anything more than that is a lot to look at for me.
I shoot a Black Gold Ambush Ascent single pin. I leave it set on 25 yards and practice so that I can kill out to 35 without moving it. The clearer sight picture is well worth. I used to shoot a 5-pin but it was unnecessary. I can see how multi-pins sights would have an advantage on a spot and stalk hunt out west. However, I think the typical treestand hunter would be better off with a single pin. I kept my 5-pin in case I do a western bow hunt but I will not be using it unless that happens.
I use a single pin sight because I think the multiple pins can get confusing when you are in that moment of pulling back on a deer. My single pin is good out to 30-35 yards which is about the farthest distance I would shoot at a deer with a bow anyways.
I used a 1 pin for a long time but it can cost time and move ment to change when hunt so I use a 5 pin to hunt with but if your target shooting then it would probly be better to use single for more precise shooting Sent from my LG-UK495 using Bowhunting.com Forums mobile app
I use a 5 pin CBE fixed for hunting. Don't have any issues with that many pins so why have to worry about having to hold over or under........
I love both styles, while the multi pin sight allows for no turning of a dial a single pin has a clearer sight picture and is easier to settle a pin on the target not having to decide which pin to use.
Different strokes for different folks, but if you need 3-5 pins to take a 30-35 yard shot, it might be time for a bow upgrade. Sent from my iPhone using Tapatalk