Martinsville here :usa:
Well,got it fixed in time to hunt yesterday evening and down one. :tu:
Thanks!I've been into archery for years but not alot of tuning experience.I had to give it all up for quite a while due to a spine injury but...
Hey Trlblzr3!Martinsville here,which town or county you in?
Thanks alot Trial153!Sure enough,i advanced the top,set nock at 1/8" high and shot bulletholes.
Ok,will do that in the a.m. Thank you for your time and advice.Will post the results tomorrow.If this works,what does that mean?I assume there...
Forgive my ignorance but let me make sure I'm understanding you before i move anything in the morn-i move the top mod to the 27" hole/notch?(I...
It has Hoyt's cam and 1/2 system.Doubled checked to make sure and top and bottom are same and they are.
As for fletching contact,i installed a Quicktune 360 which has no contact,and ended up reinstalling the whisker biscuit that came on the bow.Same...
Me either but i was wrong-it's just over an inch,not two inches.I should've measured before posting instead of guessing but as noticeable as it...
It's level with berger hole.
That's an understatement lol.I was wrong it's a little over an inch but still odd looking none the less.
Okay-my apologies for incorrect measurement-it's just over an inch high.I was guessing on my original post when i should've measured then.It sure...
I purchased a Reflex Grizzly draw weight set at 60 lbs and I set the draw length at 27".In paper tuning at about 8 ft,i had bad downward tears.I...
Separate names with a comma.