hi all, I just finished paper tuning my crx35 but when I went so shoot in my 20 yard pin I ran out of adjustment and my top pin sits right up against the top of the housing. Is there anything I can do to get a 20 yard zero with the top pin. I hope this makes sense
Could be a number of things. Fletch contact could be messing up your paper tune results. Arrows not properly spined. Cams not in synch causing erratic arrow flight messing with your paper tune. Or something as simple as your rests position / nock point are just to high.
Not sure which sight your using but you might have to move the whole pin housing up and start over so your pins or more centered.
Like Blarney said you can move the whole housing up and the pins down or if you have multiple mounting holes on your sight you can move it out away from you to help! good luck!