I have lost several outserts and tips (broad heads too) in my rhinehard... anyone else have this problem with these? Have you fixed the problem? Thanks, T
Use better glue. I use Loc Tite Gel in the black bottle. Sent from my HTC One_M8 using Bowhunting.com Forums mobile app
I bought a 6pk. from gander mountain, i haven't had any issues. But i did have my cut down some, at the shop. Like buffalo said use better glue.
I have had certain problems with them. Make sure to get practice points that match the width of your arrow. I found that to be the cause of my problems.
In most cases it's not so much the glue as it is the prep of the arrow and insert. I always wipe them both down with Acetone before gluing and it's greatly minimized my issues. I also use a slow set (24 hour) 2 part epoxy instead of the super glues or fast set epoxies that a lot of guys use. Yes, you have to wait a little while to shoot your new arrows, but it's worth not losing inserts inside your target.
Thanks everyone... I think the issue I have is a function of several problems... insufficient cleaning/prep., and poor glue. i will change glue and get some acetone. I like the arrows so I hope this helps.... Tom