Results 1 to 6 of 6
  1. #1
    jporteous's Avatar
    jporteous is offline Junior Member Newb
    Join Date
    Nov 2011
    Location
    Prescott, Arizona, United States
    Posts
    14
    Post Thanks / Like

    String Stop/Dampener

    So I ordered a Vibracheck online for my Martin and when I was looking at them online they said "Fits Most Bows" but guess what...it doesn't, toooo small. So I went to Ace Hardware to look for a reducer but the people there are clueless so I think im going to have my buddy make me a part in his machine shop and have him install the part in my bow with the Green Locktite so I wont come out. You guys think this is a good idea or should I just send it back?
    Martin Bangel @ 30/60
    NAP Apache Drop & 8"Stab
    TruGlo Op & Quiv
    Easton Flatlines 400
    Muzzy MX-3
    Tru Ball Outlaw

    Stick Slingers Union
    jerAco Outdoors

  2. #2
    G-Street is offline Senior Member Semi-Hardcore
    Join Date
    Feb 2012
    Location
    SE Kansas.
    Posts
    315
    Post Thanks / Like
    Honestly, I'd just send it back. Seems like more work than it'd be worth.
    2011 G5 Heat by Quest: Nap Apache drop away, G5 Optic Rocks 6 pin, Bemin ICS 400's and...... Feathers only!

    Happy Hunting!

  3. #3
    rcowan's Avatar
    rcowan is offline Senior Member Weekend Warrior
    Join Date
    Mar 2012
    Location
    SE AZ
    Posts
    247
    Post Thanks / Like
    Call them;find out what fits your bow and then send it back.

    RC

  4. #4
    jporteous's Avatar
    jporteous is offline Junior Member Newb
    Join Date
    Nov 2011
    Location
    Prescott, Arizona, United States
    Posts
    14
    Post Thanks / Like
    go it all fixed up, took 15 min. to make the part
    Martin Bangel @ 30/60
    NAP Apache Drop & 8"Stab
    TruGlo Op & Quiv
    Easton Flatlines 400
    Muzzy MX-3
    Tru Ball Outlaw

    Stick Slingers Union
    jerAco Outdoors

  5. #5
    jfergus7's Avatar
    jfergus7 is online now Field Staff Legendary Woodsman
    Join Date
    Jul 2008
    Location
    Bristol, WI/Buffalo Grove, IL
    Posts
    11,159
    Post Thanks / Like
    Post a pic if you can. Need to get one for the girlfriends bow. Curious what you had to do to yours.

    Sent from my DROID X2 using Tapatalk 2
    Mathews Helim
    Carbon Express Blue Streak Selects
    NAP Killzones & Quickfletches
    NAP Apache Carbon
    Pine Ridge Nitro Stabilizer
    Lakewood Products Bowfile

    Click Here: My 2014 Bowhunting.com GTG Promo Video



  6. #6
    jporteous's Avatar
    jporteous is offline Junior Member Newb
    Join Date
    Nov 2011
    Location
    Prescott, Arizona, United States
    Posts
    14
    Post Thanks / Like
    all we did was measure the inside/opening in the bow and the size of the vibracheck threaded insert. cut a peice of round tube stainless steel to 1 inch bored a hole through to match the size of the insert and threaded the inside of it and boom it work. It slid right in to the hole and I set my set screw and threaded the vibracheck right in.
    Martin Bangel @ 30/60
    NAP Apache Drop & 8"Stab
    TruGlo Op & Quiv
    Easton Flatlines 400
    Muzzy MX-3
    Tru Ball Outlaw

    Stick Slingers Union
    jerAco Outdoors

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •