Just wondering what people are shooting... I'll tally results when done. Arrow Brand Arrow Model Arrow length Arrow Spine Arrow FOC Other? Thanks, Tom
Arrow Brand-Gold tip Arrow Model-XT Hunter Arrow length-28' end of carbon to nock throat Arrow Spine-.400 I dont know what the FOC of this setup is, but with 100 gr point it weighs in around 400 gr.
Easton Axis 27 to valley of nock 340 spine Hair over 15% 470 grain total weight. Sent from my iPhone using Tapatalk
Arrow Brand - Easton Arrow Model - Deep Six Injexion FMJ Arrow length - 28.5 Arrow Spine - 330 Arrow FOC - n0t sure
Arrow Brand - Easton Arrow Model - ST Axis Full Metal Jacket Arrow length - 28" Arrow Spine - 500 Arrow FOC - 11.8% Other? Total Arrow Weight = 400 grains Actual Draw Weight = 42 lbs Arrow Speed = 240 ft/sec Momentum = 0.4259
Easton Lightspeed 28 1/2" not including nock 500 spine FOC = ?? Total arrow weight is somewhere around 360-365 grains. Draw weight is somewhere between 41-45lbs. DL is 26.5". I think I was getting 230 fps. I like to be exact. LOL!
Arrow Brand: Carbon Express Arrow Model: Pile Driver Arrow length: 29" Arrow Spine: 350 Arrow FOC: I don't know the pile drivers are weight forward arrows and I went to 125 grain Broad heads for next season. Should weigh around 475 grains or so
Gold tip XT hunter 27.5 340 10% foc Total arrow weight about 415gr, speed about 275fps Soon to be switching to easton bloodlines with heavy inserts to get a higher foc of about 16%
Arrow Brand. Beman ICS Arrow Model. ICS Hunter Arrow length. 30.5 Arrow Spine 340 Arrow FOC. 13.7 458 total weight with blazer veins.
Easton Axis 300, 28.5", 13.1% Easton FMJ 300, 29.5", 14.8% Easton ACC 3-71/300, 30", ?% Gold Tip Velocity Pro 300, 28" 14.1% Easton Axis 340, 29, ?% Easton ACC 3-49/390, 28" 13.6% All with "heavier" inserts and Flex-Fletch FP-360 or SK-300 vanes.
DCA SD Hunter 27.5 400 foc ? new set up so I haven't figured it out yet. My axis and fmj were at about 14%
