Out shooting the rpm this afternoon with my camera mounted on it. The camera is a kodak playsport mounted with a bowfinger mount. The vibration picked up was inaudible at the shot by ear. Not too sure if I should even worry about it. I was just wondering if any of yall have had this experience before or if the the source of vibration was identifiable by any of yall.
vibrations not too noticeable, on our end, but your lucky the camera doesn't freeze up or turn off with the vibration. reason why i got rid of mine...
I heard that vibration LOUD and CLEAR! Could not identify the source of it though. At first I thought it might be a loose tip on the arrow... but at the end I'm pretty sure that's not what it is. I'd check all your accessories to make sure that a screw did not back out some. If you find any perhaps a dab of locktite would solve the problem. Good luck in finding the source.
- Jerry -
SGT USAF '64-'68
Mathews Chill with Rock Mods! /50# 27" Draw
Easton HEXX w/NAP QuikFletch QuikSpin Vanes
100gr Wasp Sharpshooter Broadheads
Trophy Ridge REACT 5-pin Sight
Axion GLM 8oz Matrix Stabilizer
QAD LD Drop Away Rest
more than likely it is something vibrating with the camera itself
Bowtech Prodigy w/ kryptek camo
Solid Flo Orange strings and cables
HHA Optimizer Lite
B-Stinger stabilizers: 10 inch front, and 6 inch back
Rage Cage quiver
Rage 2 Blade 125gr.
Something isn't right. My RPM360 is one of the quietest bows I've shot. I'm guessing it's a loose mod screw or maybe something with the camera or it's mount.
BowTech Pro Staff
Team 4 - Honovi Hunters - 2014 BH.com Champions!!
The vibration most likely isn't from the bow. I mount my Sony action cam to my stabilizer with a Gorilla pod wrap mount and the same thing happens. There's a lot of force when an arrow is fired.
Sent from my iPhone using Tapatalk