Make your own wind indicators for super cheap!

Discussion in 'DIY Archery & Hunting Projects' started by Matr138920, Jun 26, 2014.

  1. Matr138920

    Matr138920 Weekend Warrior

    Joined:
    Oct 30, 2012
    Posts:
    164
    Likes Received:
    0
    Dislikes Received:
    0
    Choose either powder type or fiber type.

    For fiber type take a empty 35mm film canister and drill small hole in center of bottom, I think i used 3/16". Fill with either cotton balls, which I cut up into smaller pieces or natural plant fiber like cattail, or milkweed. Push material through hole from inside to start. Put cap on and your ready to go!

    For powder type take an empty eye drop or nose spray bottle and remove tip. Clean all parts out. Drill a 1/16" hole from the tip opening through to the bottom. Clean out plastic shavings. Fill with chalk line chalk. Put tip back on and your set, don't forget to put the cap on! The powders come in several colors, so use you like and can see the best.
    A word of caution though, don't breath in the dust, or let it get into your eyes, it is a irratant. Also don't get it on your clothes, because some colors will permanently stain.
     
  2. ybohunt

    ybohunt Die Hard Bowhunter

    Joined:
    Mar 8, 2014
    Posts:
    1,433
    Likes Received:
    262
    Dislikes Received:
    1
    Location:
    Huchinson kansas
    For the chalk kind I use baby powder instead of chalk line powder becauce baby powder will not stain your clothes.
     
  3. ChuckC

    ChuckC Die Hard Bowhunter

    Joined:
    Apr 8, 2013
    Posts:
    2,403
    Likes Received:
    8
    Dislikes Received:
    0
    Location:
    S.E. MI to live and S.E. OH to bowhunt!
    Great ideas! Another one I've used is take fine thread about 12 inches long and tie it at one end to a thumb tack. Hang it from a branch nearby or overhead. Until it gets hung up it constantly tells you which way the wind is blowing just at a glance.
     
  4. OK/Sooner

    OK/Sooner Die Hard Bowhunter

    Joined:
    Oct 2, 2011
    Posts:
    2,980
    Likes Received:
    1,208
    Dislikes Received:
    2
    Location:
    Eastern OK
    My buddy does this except with a piece of floss. An he ties it to the end of his stab. He has always swore by it.
     
  5. Matr138920

    Matr138920 Weekend Warrior

    Joined:
    Oct 30, 2012
    Posts:
    164
    Likes Received:
    0
    Dislikes Received:
    0
    I decided to post two ways of making them, cause when I hunt on public land the fibers of the cotton balls don't really work that well unless you are elevated, like in a tree stand.
     
  6. wrassjd

    wrassjd Weekend Warrior

    Joined:
    Mar 7, 2013
    Posts:
    74
    Likes Received:
    0
    Dislikes Received:
    0
    Location:
    lake mills, wi
    What about using baking soda for the powder style seeing as some people use it as a scent control?


    Sent from my iPhone using Tapatalk
     
  7. iHunt

    iHunt Grizzled Veteran

    Joined:
    Sep 14, 2009
    Posts:
    4,715
    Likes Received:
    5
    Dislikes Received:
    0
    Location:
    Manhattan, Kansas
    Thats what I use. It works alright, baking soda is kind of heavy, so it won't float in the thermals quite as well as lighter powders. But if you understand thermals to begin with, it gives you a pretty good understanding of what your scent is doing. And its cheap!
     
  8. jeffacarp

    jeffacarp Grizzled Veteran

    Joined:
    Mar 11, 2011
    Posts:
    3,008
    Likes Received:
    4
    Dislikes Received:
    0
    Location:
    Southeast Kansas
    Milk weed pods work well here. I always keep some handy in my pack.
     
  9. MNElkNut

    MNElkNut Weekend Warrior

    Joined:
    May 12, 2014
    Posts:
    51
    Likes Received:
    0
    Dislikes Received:
    0
    Location:
    MN
    I am not a fan of the powder kind anymore. I had the cover come off in my pocket somehow and my whole pocket was full of powder!

    I do tie a piece of yarn fiber to something (gun barrel or bow) and that has worked very well.
     
  10. ThreeJsDad

    ThreeJsDad Newb

    Joined:
    Jul 15, 2014
    Posts:
    3
    Likes Received:
    0
    Dislikes Received:
    0
    Chopped up or whole CDC feathers would work well. You could even wash out a small plastic spice jar. It would give you a flip top lid and you can pull out one feather and let it drift. They will float for a long time and not spook animals.
     
  11. hunter1005

    hunter1005 Newb

    Joined:
    Dec 23, 2010
    Posts:
    29
    Likes Received:
    0
    Dislikes Received:
    0
    I use dandelion seeds. They float with the wind and thermals.
     
  12. enemyofsilence

    enemyofsilence Weekend Warrior

    Joined:
    Mar 12, 2014
    Posts:
    88
    Likes Received:
    0
    Dislikes Received:
    0
    Like Sooner. Dental floss on stab. No mess.
     

Share This Page