I just had my bow tuned up. It is a Bear Truth 2 and I have had it about 2 years, shooting only in the back yard but planning to hunt with it in January.
When I shoot field points at 20 yards, the bow shoots to my point of aim. Before tuning, the broadheads did too.
Now the broadheads shoot 3 inches low and 5 inches left. Consistently.
I am using 100 grain field points and 100 grain fixed broadheads.
I have been careful to eliminate shooter error. I am a newbie for sure, but I can consistently group the field points in about a 3" circle on the target with the occasional flyer.
Any thoughts on why the broadheads might be going to a different spot? They also group together, just 5 inches left and 3 inches low.
Any suggestions for figuring this out or adapting?
i had the same issue with new NAP thunderheads this year, wasnt sure what to do, called my bow shop, and they said i would have to adjust my sights to where the broadheads were shooting. Just sucks because i will have to reset my pins for the field tips for the off season again. if there is another fix i would love to hear about it. The guy at the shop said if they are grouping that is where they are hitting, and i would have to adjust to them...
HOYT NITRUM 30
Easton Axis nano 340's
Apache drop away, and stab
CBE TEK Hybrid
If it was me and they are hitting consistantly, I'd move my sights, hunt and then figure it out afterwards. JMO
Last edited by WesternMdHardwoods; 12-24-2010 at 10:11 PM.
Bowtech Carbon Knight--29"--71lb
Custom Axcel Vision Pro
Easton Flatlines(Pink Wrap/White Blazers) 380grn--->321FPS---->Smokin!!!
You have come to the right place, alot of guys on here are great with this sort of thing, give it a day or two and they will have you in the game.
Proud member of team KILL
Everything they've done (work and advice) so far is wrong. I'd find a different "pro shop".
I'm not kidding.
Based on the information given, we/you can't trust that center shot is correct. Since we don't know that, everything else is moot.
Take it somewhere else.....and tell them what you told us.
Assuming you are properly spined (again, don't know since we don't know what # your bow is, final arrow weight, or what spine your arrows are), you should always be able to get your FP's and BH's hitting the same POI.
Download a copy of the guide in my signature, and read through it from start to finish. Some of it doesn't pertain to you, as it's a guide setup for both compound release (CR), compound fingers (CF), and Recurve. Like Jeff said, the most likely culprit (assuming spine isn't an issue) is your centershot. You need to start there and work your way up to BH tuning (this is where the guide comes in). If you don't feel comfortable doing this, take it to a different pro shop and talk them through your issue.
Out of curiosity, what is your draw weight, arrow length, and arrow weight?
Definitely get some help from someone who knows what they are doing, and then begin a process in learning how to do your own tuning.
You'll be much happier in the long run. There is no satisfaction quite like shooting a well tuned rig you tuned yourself and honestly in the end No one can do it as good as you can yourself.
Home of the MeanV Custom String Suppressor
Maitland Bow Dealer
The Bow is a Bear Truth 2 with the draw weight set to the maximum for my bow, which is 60 lbs. (haven't measured it, but this was my request of the pro shop, which has a good reputation around here, and is the only place around except for Bass Pro and Gander, etc..)
My arrow length is 29" and I am shooting a 100 grain fixed broadhead and 100 grain field points. The have two inch twister vanes if that makes any difference.
I just got up and got two arrows. The original dozen arrows are labled Beeman 400 Black Max and say 9.6 gpi. If this means 9.6 grains per inch, then I guess a 29 inch arrow weighs about 278 grains?
Of course I broke a a few of those so when I took my bow in to have it checked out, I bought a half dozen more arrows.
The other 6 (5 of which are used for the broadheads as it turns out) are Beeman 400 Bone Collector and they say 9.0 gpi. 9 x 29 = 261 grains per arrow, right?
This is definitely the first time I have noticed that this specification is different. I had to put on my reading glasses to distinguish the difference between the .0 and the .6.
The Black Max has apparently been discontinued so they sold me the Bone Collectors instead with the assurance that they would shoot the same.
Also, I said I had my bow tuned, and I am not sure if I was accurate in describing it that way.
I have shot a good bit in the back yard, and part of the wrapping on the string started to fray, so in preparation for a likely hunt in January, I took it in and had the string fixed. Not replaced. They told me what they did to it but I cannot remember what they said. When I got home, the field points were hitting exactly the same as before.
I guess I just assumed that when they fixed the string they "tuned it up". Sorry if that description made this harder to solve.
I can move the broadheads back to the same shafts at the field points and see if the problem disappears.
Anything else I need to do that you can think of?
I would like to thank everybody here for their help. Much appreciated. I will read through the guide and begin to learn about tuning.
Easton Arrow Tuning and Maintenance Guide:
Read it, practice it, learn it, adapt it, love it. It's your foundation for bow tuning independence.
"Welcome to Alaska! Step out of your car and into the food chain."