How to keep dual cams in sync? Help please

Apology in advance for the noob question.

So I just today got my first dual cam bow. It's a drive quest set at 70lbs. Not the highest end bow on the market, but it's a huge step up from my Bear. Question is the bow is a dual cam, so how do I ensure the cams are in sync when I shoot? I only just go the bow, so it's pretty much fresh from the factory. Want to do things right from the start.

 

Check in the owners manual but you really need to put it in a draw board and then add or remove twists from either the buss or control cables to get it in time.

 

Binary cams is the way to go with dual cams

 

Not sure my bow has binary cams. A pro shop should have a draw board?

 

Depends in the shop. Mine does. But you can also make your own for relatively cheap.

 

You want to make sure both cams are hitting the stops at the same time. If they aren't you can add twists to the cable that is hitting first.